| CL-200 Mini Parts Conveyor
|
|
Standard Specifications:
| • |
Length:
48" or 60" long. |
| • |
Belts:
8" and 12" Wide white PVC with 1" high
cleats on 12" centers. Other belt types available. |
| • |
Beds:
Formed steel channel slider bed frame 12" and 16"
wide. |
| • |
Guard
Rails: 2" high angle with back flapped hopper. |
| • |
Supports:
Single pipe pedestal base support. |
| • |
Drive:
.20 HP Motorized pulley 1PH/60C /115V. |
| • |
Speed:
45 feet per minute. Other speeds available. |
| • |
Controls:
On/Off switch with thermal overload wired and mounted
w/8 foot cord and plug. |
| • |
Inquire
about this product |
|
|
| CL-300 Incline Cleated Belt
|
|
Standard Specifications:
| • |
Belts:
8" to 24" wide white or black PVC with 2"
high full width cleats vulcanized to belt on 12"
centers.
(other cleat heights & spacing available on request) |
| • |
Beds:
Formed steel slider bed frame 12" thru 30". |
| • |
Supports:
"H" type, adjustable height w/ sway bracing. |
| • |
Drive:
Overhead mounted 1/3 HP TEFC motor-reducer with fully
enclosed guard. 115 V/ 1 PH/60C or 230-460 V / 3 PH /60C
(specify). |
| • |
Speed:
Standard 60 ft. per minute. Optional Vari-Speed Drives
also available. |
| • |
Guard
Rails: 4" high formed channel guard rail on both
sides next to belt with rear flapper at infeed. |
| • |
Finish:
Bilt-Rite blue. |
| • |
Electrical
Controls: On/Off switch with thermal overload protection
wired and mounted with 8 foot cord & plug. |
| • |
Inquire
about this product |
|
|
| CL-450 Parts Take-Away
|
|
Standard Specifications:
| • |
Belts:
12", 18" and 24" wide white PVC with 1"
high UHMW block cleats bolted to belt on 12" centers.
(others available on request) |
| • |
Length:
30" Horizontal section; 48", 60" or 72"
inclined section (@45° angle). |
| • |
Bed
Frame: 7 3/4" high formed steel channel. |
| • |
Supports:
"H" type, adjustable height w/sway bracing. |
| • |
Drive:
1/3 HP TEFC motor reducer with fully enclosed guard 115V/
1Ph/60C (3 phase also available). |
| • |
Speed:
Standard 45 feet per minute. Optional Vari-Speed Drives
also available. |
| • |
Controls:
On/Off switch with thermal overload wired and mounted
with 8 foot cord and plug. |
| • |
Inquire
about this product |
|
|
| LP-600 Low Profile Parts Conveyor
|
|
Standard Specifications:
| • |
Length:
5'-6", 7'-6" & 9'-6". |
| • |
Belt: 8" or 12" wide black PVC oil-resistant. |
| • |
Bed:
Sturdy 11 gauge formed "U" pan, 12" or
16" wide. |
| • |
Supports:
Adjustable height tripod on one end. |
| • |
Drive:
1/4 HP gear motor 115 Volt/1 phase/60 cycle. |
| • |
Pulleys:
4 1/2" diameter drive, 1 5/16" diameter tail. |
| • |
Speed: 45 feet per minute. |
| • |
Controls:
On/Off switch with thermal overload protection wired and
mounted with 8 foot cord and plug. |
| • |
Overhead
mounted drive available to suit your needs. |
| • |
Inquire
about this product |
|
